RB5009UPr+S+OUT – Outdoor PoE in/out Router, 2.5Gbit LAN, 7x 1Gbit LAN, SFP+, 3x 24-57V 802.3af/at
Availability: Currently not in Stock
Warning: Last items in stock!
Outdoor version of the best-selling Mikrotik RB5009 heavy-duty PoE router. Extensive power redundancy at the best price! 7x Gigabit Ethernet ports, 1x 2.5 Gigabit Ethernet, 10G SFP+, 1GB RAM, 1GB NAND, modern quad-core CPU, 9 (!) power options, IP66 waterproof Enclosure.
Even the most experienced network administrator doesn't know when the next storm, lightning, flood, heat wave or power outage will strike. But with the right tools, you can protect your network from most problems! Here is the wish list for the perfect tool:
The addition of an IP66 rated waterproof case to the RB5009 series has enabled Mikrotik to tick all the boxes! The new Mikrotik RB5009UPr+S+OUT is a compact and economical solution that will revolutionize your Truss network configurations. It is one of the most powerful outdoor network devices at the best price on the market!
Like the indoor version, this RB5009 features 7 Gigabit Ethernet ports, one 2.5G Gigabit Ethernet port, one 10G SFP+ slot and a full USB3 port!!
The unit offers "extensive redundancy" with 9 different power supply possibilities. There's a 2-pin power connector on the front, plus PoE-in and PoE-out on all eight Ethernet ports. The card can use any of these sources for power, choosing the one with the highest voltage when multiple sources are available.
Mikrotik RB5009 requires up to 21W for its own power supply. If you use PoE-in, the card will stay powered on even if 8 of the 9 power sources go out unexpectedly. An unprecedented redundancy!
All power options support a wide range of voltages, from 24V to 57V. However, voltages cannot be mixed..
This Mikrotik Router can be used to supply power to other devices (equipped with PoE-in) via the PoE-out functionality available on all 8 ports. This function can only be used if it supplies power through the 2-pin connector.
Each PoE-out port can deliver up to 25W of power. All ports together are limited to 130W, which should be sufficient for most setups. If necessary, you can manually specify the maximum power available from the power sources.
This product also features single voltage PoE output, which can be compatible with 802.3at/af or low voltage PoE. This is determined by the voltage applied on the 2-pin connector, as no voltage conversion is done on this board.
In terms of processing power and available use cases, this router can do it all: PPPoE termination, DHCP to clients, local queuing, MPLS Push/Pop/Swap and MPLS Forwarding, VPLS/VXLAN termination, hardware bridging, and more!
The RB5009 series continues to redefine affordable reliability for small, medium and large ISPs!