Availability: Currently not in Stock
Warning: Last items in stock!
|PoE Device Type||Alimentatore PoE|
|Banda 5 GHz||Sì|
|Throughput 5 GHz / 2,4 GHz (Gbps)||1.2 Gbps|
|Gigabit Ethernet ports||1|
|Integrated wireless card||Yes|
|Output power (dBm)||32|
|Connectors||4xRPSMA + 2xRPSMA (Beamforming Antenna)|
|Dimensions||47 cm x 31 cm (18.5 in x 12.2 in)|
|Integrated passive PoE injector||Yes|
ePMP 3000 Overview
In continuing tradition of affordable performance without compromise, the ePMP3000 Access point and subscriber portfolio brings the combined feature set of ePMP1000/2000 and adds industry leading throughput with the ePMP3000. Featuring a 4X4 Access Point and sector antenna, the ePMP3000 combines self interference mitigating GPS sync solution with interference mitigation from ePMP2000 and combines it with Multi User Mimo. Supporting an auxiliary SFP port, 80MHz channel bandwidth and 256QAM modulation the ePMP3000 can provide up to 5x the performance as compared to previous generation of products.
MULTI USER MIMO
Achieving higher throughput in the downlink is often solved by achieving higher modulation or wider channels. In both cases, the environment and interference prevents achieving higher modulations or operating in wider channel bandwidths. ePMP 3000 employs Multi User Mimo technology (MUMIMO) to simultaneously transmit to two subscribers in the downlink and thus doubling the throughput in the downlink.
Noise is always a concern, and as more transmitters are deployed, will continue to be a critical factor in operation. While almost all radios have some type of filtering, many use static filters that block out only noise from outside of the radios total operating spectrum. While this provides a clear channel for operation, these systems with fixed filters still allow noise from neighboring channels to affect system performance. Cambium Networks solutions use dynamic filtering with a static filter to block noise from outside of the operating spectrum but also a dynamic filter to block out interference from adjacent channels. As the system changes to another channel, the system automatically blocks out noise from adjacent channels to improve signal quality.
Frequency is limited. There will never be any more of it. By re-using frequencies when deployed in back-to-back configuration, a network operator can effectively use the same frequency twice to connect users. In large deployments, a network operator can connect thousands of users by re-using the same frequencies across the field service area. This technology maximizes the use of available frequency and can provide access to thousands of users in a small amount of spectrum.
When networks become more dense, self interference becomes an issue. GPS synchronization coordinates the entire network, reduces self interference, and keeps network performance high as more subscribers are added.
SMART BEAMFORMING AND BEAM STEERING
As more emitters are deployed in the service area, it is important to mitigate noise and interference in order to provide reliable high speed connectivity. The ePMP 3000 Access Point works in conjunction with the optional Beam Steering antenna to create narrow beams in the uplink to improve signal to noise ratio. Placed at the access point on a tower, the smart antenna will create tighter beams to connect with subscribers while nulling out radiation from unwanted emitters in the field.
ePMP employs a sophisticated priority-based, air fairness, starvation avoidance algorithm for allocating RF resources to SMs. The allocations are based on airtime instead of throughput and so we avoid the situation where SMs in poor RF conditions take up an excessive amount of time and therefore available capacity.