PACK10-05K

KIT Wireless Outdoor CPE, Metal Enclosure, 5GHz 19dBi MIMO Antenna, Gigabit ethernet



51,19 €

Currently out of stock


  1. Prodotto al momento non disponibile.



43,57 €

Currently out of stock




5,85 €

In Stock


100,61 €

Uno dei prodotti non è più disponibile. Questa confezione non può essere acquistata

DESCRIZIONE DELLA CONFEZIONE

KIT Wireless Outdoor CPE, Metal Enclosure, 5GHz 19dBi MIMO Antenna, Gigabit ethernet

The kit consists of the following products:

  • RF Elements Antenna with metal enclosure
  • Mikrotik RouterBoard with Gigabit ethernet
  • Power adapter with POE

 

PURCHASE AND UTILIZATION INFORMATIONS

Please note that the KIT is just a group of components useful to make a certain product. The CE certification, where required, it is always and only related to each component of the package (issued by the manufacturer of the component), not to the product resulting from the collection. 

The KITs are intended for the exclusive use of professionals who must make all steps to comply the provisions of the R&TTE 99/5/EC Directive (or other legislation in force in the country of use) for the marking (CE, FCC or the one appropriate) of the finished product and to verify its compliance.

COMPONENTI DELLA CONFEZIONE

Carrier Class outdoor aluminium enclosure with built-in high gain MIMO antenna


Description

StationBox® XL CARRIER CLASS is aluminium outdoor CPE antenna enclosure designed to meet highest requirements on performance, durability and environmental resistance. With built-in high gain dual polarization antenna, NanoBracket® 3-Axis adjustable mount and IP65 environment resistance rating, it is the most advanced integrated CPE solution on the market.

StationBox® XL CARRIER CLASS has built in dual polarization antennas with 19dBi gain (max.) in 5GHz, or 14dBi gain in 2.4GHz. New innovative antenna design is addressing customer requirements for increased gain and reduced side lobes in antenna radiation pattern. To eliminate RF losses, we integrated semi-flex waveguides with MMCX connectors.
StationBox® XL CARRIER CLASS is built to meet requirements for IP65 rating for environmental resistance. Enclosure and base of NanoBracket® are made of die cast aluminium. All hardware is made of Stainless Steel. Radome and plastic parts are made of high quality outdoor rated ABS plastic. Ethernet connector is outdoor rated and water resistant. Silicone gaskets are applied.

StationBox® XL CARRIER CLASS comes directly from factory equipped with NanoBracket®, our ultimate mounting solution proven by more than 100.000 of installations. 3-Axis NanoBracket® positioning system allows you to adjust the position of StationBox® in three axis using ball hinge. StationBox® XL CARRIER CLASS can be easily mounted on the pole or on the wall. 3-Axis Bracket uses ball hinge with special fast locking system that can be operated with one hand, even when wearing winter gloves.

StationBox® XL CARRIER CLASS is designed for seamless integration with MikroTik™ RouterBoards RB91x, RB71x and RB41x with integrated radios. The integration of the board requires no tools and takes couple of seconds: just snap the board in. Visibility of RouterBoard LEDs is maintained.


Main Features

  • MIMO 2x2 largeband antenna 5,47-5,85GHz gain 19dBi.
  • Dual polarization for MIMO optimal performances.
  • Suitable for outdoor purposes.

Applications

  • Outdoor WLAN MIMO 2x2 links.
  • Long Range 5GHz wireless systems. 

SCHEDA TECNICA

CPU Frequency 5,45-5,85GHz
Mounting On pole/wall
Usage Outdoor
Polarization Dual
Antenna gain (dBi) 19
Antenna type Enclosure Antenna
Radiation type Directional
Antenna shape Panel
Connectors MMCX
Peso 1,85 Kg

MIKROTIK RouterBOARD RB911G-5HPnD, 5GHz 2x2 MIMO, Gbit Eth, RouterOS lvl3, 2x MMCX


Description

RB911G-5HPnD

The RB911G-5HPnD is a small wireless router with an integrated 5Ghz high power wireless card. The Gigabit port helps to utilize the full potential of 802.11n wireless speeds.

RB911G-5HPnD includes RouterOS - the operating system, which can be a router, firewall, bandwidth manager, a CPE and more - all at the same time.

The integrated wireless card is capable of up to 1000mW output power. It has built in 16kV ESD protection on both the Ethernet and the MMCX ports.

The supported 5GHz frequencies are 4800 - 6075.

SCHEDA TECNICA

CPU Frequency 600 MHz
CPU core number 1
Gigabit Ethernet ports 1
Frequency band 5GHz
RAM on board 32 MB
Fast Ethernet Ports NO
Integrated wireless card Yes
MiniPCI slots No
MiniPCI-e slots No
USB ports No
Memory card No
SIM slot No
Wireless standards 802.11 a/n
Chain number 2
Connectors MMCX
Power Jack Yes
PoE in Yes (Passive Poe)
PoE out No
802.3af support No
Operating temperature -35°C +65°C
License level 3
Dimensions 105 x 105 mm
SFP cage No
SFP+ cage No
Serial port No

AC/DC Wallmount Switching Converter with POE, Input 100-240Vac, Out  24Vdc 1A


Wallmount Switching Power Supply, Input 100/240Vac Output 12Vdc 1000mA, DC connecotor Plug Jack 5,5mm(outside) x 2,1mm (inner).

SCHEDA TECNICA

PoE Device Type Alimentatore PoE
Input Voltage 220 V
Output Voltage 24 V
Output Milli Ampere (mA) 1000
Integrated passive PoE injector Yes
PoE Mode B
Potenza in uscita (W) 24
Gigabit si
Canali PoE out 1